Canon iPF6400S - Other Messages; ERROR Exxx-XXXX (X Represents a Letter or Number); GARO Wxxxx (X Represents a Number); Hardware Error. XXXXXXXX-XXXX (X Represents a Letter or Number)

Other Messages
Other Messages
GARO Wxxxx (x represents a number) ................................................................................................................. 922
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 922
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ............................................................ 922
Prepare for parts replacement. ............................................................................................................................... 922
Parts replacement time has passed. ...................................................................................................................... 923
Unknown file. .................................................................................................................................................................... 923
Calibration There is a problem with the multi-sensor. ................................................................................... 923
Multi-sensor error .......................................................................................................................................................... 923
Roll feed unit error. ....................................................................................................................................................... 906
No Roll Unit. ...................................................................................................................................................................... 906
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause Corrective Action
There is a problem with the print job. Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. Write down the error code and message, turn off the printer, and contact your Canon deal-
er for assistance.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Cause Corrective Action
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Turn off the printer and remove the roll from the printer before re-
storing power.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
Turn off the printer, open the Top Cover and remove the tape or
the Belt Stopper before restoring power.
An error requiring service may have occurred. Turn off the printer and wait at least three seconds before restor-
ing the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for
assistance.
Prepare for parts replacement.
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for
which service is required.
If "Parts replacement time has passed." is displayed, you can continue to use the printer
for some time.
Contact your Canon dealer for assistance.
GARO Wxxxx (x represents a number)
iPF6400S
User's Guide
Error Message Other Messages
922