Canon iPF6400S - Cannot Feed Paper; Cannot Cut Paper; End of Paper Feed

Cannot feed paper.
Cannot feed paper.
Cause Corrective Action
Paper could not be ad-
vanced correctly during
feeding.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.") ➔ P.870
(See "Clearing a Jammed Sheet, Fed Manually.") ➔ P.873
3. Load the paper.
(See "Loading Rolls in the Printer.") ➔ P.473
(See "Loading Sheets in the Feed Slot.") ➔ P.495
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
Paper could not be ad-
vanced correctly during
ejection.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.") ➔ P.870
(See "Clearing a Jammed Sheet, Fed Manually.") ➔ P.873
Cannot cut paper.
Cannot cut paper.
Cause Corrective Action
There are sheets left on the
Ejection Guide.
1. Press the OK button and remove the paper.
2. Load paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") ➔ P.473
There is a foreign object by
the Output Tray, obstructing
the Cutter Unit.
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer
under the recommended envi-
ronmental conditions for the
paper.
Use the printer only where the recommended environmental conditions for the paper are met. Note that
various environmental conditions are recommended for various types of paper. For details on the recom-
mended environmental conditions, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔ P.464
You are using paper that is
not compatible with automatic
cutting.
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.") ➔ P.483
For information about paper that is compatible with automatic cutting, see the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.") ➔ P.464
2.
Press the OK button and remove the paper.
In other cases, the Cutter Unit
may be damaged.
Contact your Canon dealer for assistance.
End of paper feed.
End of paper feed.
Cause Corrective Action
Although an attempt was made to advance the paper manually, it reached the limit posi-
tion that can be advanced.
Canceling manual advancing.
(See "Feeding Roll Paper Manually.") ➔ P.481
Cannot feed paper.
iPF6400S
User's Guide
Error Message Messages regarding paper
908