Warning
• Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into contact with
electrical components inside the printer, there is a risk of fire or electrical shock.
Important
•
When handling the White/Black Backing Plate, do not
touch the white backing plate (a) or black backing plate (b)
directly with your hands.
If the surface becomes dirty or scratched, the printer may
not be able to obtain the correct color measurement re-
sults.
•
Make sure that no dirt remains in the grooves on both
ends of the Spectrophotometer Eject Guide.
If any dirt remains, the printer may not be able to ob-
tain the correct color measurement results.
Cleaning the Paper presser
Dirt on the surface of the Paper presser may be transferred onto the paper or the White/Black Backing Plate.
1
Turn the printer off.
(See "Turning the Printer On and Off.") ➔ P.21
2
Unplug the power cord from the outlet.
Caution
• Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the
printer on poses a risk of injury if you touch moving parts inside the printer.
3
If the Up-down Unit is lowered, open the Spectropho-
tometer Unit Cover and lift up the central part (near
the blue label) of the Up-down Unit.
Important
• Lifting up the ends of the Up-down Unit may cause damage.
4
If the Paper presser is dirty, wipe it clean with a dry cloth.
If it is particularly dirty, use a damp cloth that you have wrung
out completely to wipe the Paper presser clean and use a dry
cloth to dry it.
iPF6400S
Cleaning the Spectrophotometer Unit (option) Parts
User's Guide
Maintenance and Consumables Cleaning the Printer
847
To Next Page
Loading...
