Perform Printing Press Simulation Print
Perform Printing Press Simulation Print
You can perform printing press simulation prints by specifying ICC profiles such as Japan Color or SWOP, and
specifying an ICC profile for the printing press.
1
Display the Main sheet.
2
Select one of the ICC profiles as the Output Profile.
3
Check the Proof check box and select the profile for the printing press you want to target from the list on
the right.
4
Click the ICC Conversion Options button to open the
ICC Conversion Options dialog box.
5
Configure the Proof Options as needed.
Note
• The proof options are Simulate Paper Color and Simulate Black Ink. The settings that can be selected vary
depending on the Conversion Engine settings.
6
Click the OK button to close the ICC Conversion Options dialog box.
7
Click the Print button.
Printing begins.
Enlarge/Reduce and Print
Enlarge/Reduce and Print
You can enlarge or reduce an image in Print Plug-In.
Three methods to enlarge/reduce and print are as follows.
•
Enlarge/Reduce and Print Matching Output Media Size ➔ P.263
•
Enlarge/Reduce and Print Matching Width of Roll Paper ➔ P.263
•
Specify Scaling, Enlarge/Reduce and Print ➔ P.265
Perform Printing Press Simulation Print
iPF6400S
User's Guide
Windows Software Print Plug-In for Photoshop / Digital Photo Professional
262
To Next Page
Loading...
