42
Cedex HiRes Analyzer Operator’s Guide
C
C
Table 4 provides the information required by a person experienced in working with XML files to adapt the XML
example to individual needs.
Customized XML files created for older versions of the Cedex HiRes Software will not work with Software 2.4.
Older files will need to be customized again based on the information provided in Table 4 .
Measurement
Data
XML Tag Syntax Remarks
CupNr CupNumber <CupNumber>
4
</CupNumber>
Workarea TEType Prozesstype,
TEValue
<TEType>
<![CDATA[Prozesstype]]>
</TEType>
<TEValue>
<![CDATA[Standard]]>
</TEValue>
ReactorId RunNumber
<RunNumber>
<![CDATA[Reactor1]]>
</RunNumber>
SampleId Sample PVSNumber <Sample PVSNumber="Sample 1">
CellType TEType Cell Type,
TEValue
<TEType>
<![CDATA[Cell type]]>
</TEType>
<TEValue>
<![CDATA[Std. Size]]>
</TEValue>
CellType and Volume settings
must match.
Precision TEType Precision,
TEValue
<TEType>
<![CDATA[Precision]]>
</TEType>
<TEValue>
<![CDATA[Normal]]>
</TEValue>
Choose the precision settings
(Normal, Minimum, Maximum,
or Superior) as defined in the
Operator’s Manual.
Dilution TEType Dilution,
TEValue
<TEType>
<![CDATA[Dilution]]>
</TEType>
<TEValue>
<![CDATA[1:1]]>
</TEValue>
Dilution= 1 -> Cedex2 Dilution
1:1
Dilution= 2 -> Cedex2 Dilution
1:0.5
Volume Volume
<Volume>300</Volume> CellType and Volume settings
must match. Never leave the
volume empty or set to “0”.
If the volume is empty or set
to “0”, an error will appear.
SampleDrawing CreationDate <CreationDate>
2006-02-10T07:17:11+01:00
</CreationDate>
Comment Remarks
<Remarks>
<![CDATA[Comment1]]>
</Remarks>
Comment field will be combined,
in this example:
Comment1ProductCode:Text1
ProcessCode:Text2
Comment ProductCode
<ProductCode>
<![CDATA[Text1]]>
</ProductCode>
Comment ProcessCode
<ProcessCode>
<![CDATA[Text2]]>
</ProcessCode>
Table 4
The Multi Run Dialog Box
Using the Load Data from XML Option
To Next Page
Loading...
Need help?
General