Cedex HiRes User Manual

23
Main Application: Counting Cells and Determining Viability
B
B
7 Setting up Multiple Measurements Using the Multi
Run Dialog Box
To set up a measurement in the Multi Run dialog box of the Cedex Control Center:
c
Open the Multi Run dialog box and prepare samples for analysis.
c
Define the Sample Parameters and the Measurement and Analysis Parameters in the Multi Run preparation
table.
c Schedule the samples via the Status column and start the measurement.
7.1 Open the Multi Run Dialog Box and Prepare Samples for Analysis
1
Click on the MULTI RUN button in the Shortcuts area of the Cedex Control Center or select Multi Run in
the Measurements menu.
The Multi Run dialog box appears.
2
Transfer 300 µL of a cell suspension sample into Cedex Sample Cups and place the cups in the desired
locations on the Multi Sample Tray.
n
Setting up Multiple Measurements Using the Multi Run Dialog Box
Open the Multi Run Dialog Box and Prepare Samples for Analysis

Cedex HiRes Specifications

General

Viability Range	0 - 100%
Concentration Range	5 x 10^4 to 1 x 10^7 cells/mL
Measurement Principle	Image analysis
Cell Types	Mammalian cells
Measurement Parameters	Total cell count, viable cell count, viability
Measurement Time	Typically < 1 minute
Power Requirements	100-240 V, 50/60 Hz
Interface	USB and Ethernet
Operating Temperature	15-30°C
Operating Humidity	20-80% (non-condensing)