Cedex HiRes - Results Viewing, Analysis, and Data Management

18
Cedex HiRes Analyzer Software Version 2.4 - Training Guide
B
B
4 Starting the Measurement
1
Ensure that the Cedex Sample Cup is correctly placed in the Multi Sample Tray or attached to the single
sample port.
2
Ensure that the reagent containers are sufficiently filled and in their correct positions.
3
Ensure that the waste container is empty.
4
Click on the START MEASUREMENT button in the middle of the Measurement dialog box to begin the
measurement.
n
The sample is injected into the chamber, and the cells are allowed to settle to the bottom of the flow chamber
for a specified amount of time (the sedimentation phase). The system checks the flow chamber for impurities
with a separate scan (Prescan) during the sedimentation phase.
Starting the Measurement