67
Software
C
C
9 General Functions of the System
The Cedex Control Center offers users with the appropriate rights access to a set of functions in addition to the
basic functions of analyzing, modifying, and reprocessing samples and measurement results. These functions
allow for easy and user-friendly operations with the Cedex Control Center, although some functions may only
be available to the Administrator (see “Administrator Functions”).
9.1 Data Management
9.1.1. Printing Reports
The main Report menu is located directly on the menu bar of the Cedex Control Center; this menu serves as
direct access to the report functionality for all of the different reports. In addition, PRINT REPORT buttons are
found in all of the appropriate dialog boxes (e.g., Measurement List, Audit Trail, etc.).
The following information can be printed:
c
Operational data
Allows the user to track a device’s operating hours, number of measurements, and liquid consumption.
c Measurement data
Contains information about measurement parameters and calculated results, for example, sample
identification data, name and parameters of the Cell Type used, calculated measurement result data, etc.
Select the desired option for the form in which the result data should be printed via the Name drop-down
menu in the Report Template for the measurement report. Options include:
c Standard standard measurement report without details.
c Full Details full report including detailed images, results and histograms.
c List for multiple measurements displayed in a list.
c Measurement audit trail measurement report with audit trail entries.
c Multiple long for multiple measurements printed one after the other.
c System configuration parameters
Provides a list of system parameters as displayed in the System Options.
c
Audit trail
Provides a statement of all user-initiated activities and related data.
c Automatic adjustment and alignment verification
Presents results from the automatic adjustment of focus, brightness and white/black balance, and the
automatic verification of the flow chamber alignment for the scanner.
General Functions of the System
Data Management
To Next Page
Loading...