54
Cedex HiRes Analyzer Operator’s Guide
C
C
7 Graphical Display of the Analysis Results
In addition to displaying the overall analysis values, the Cedex HiRes Software can also display graphic diagrams
of the results. These diagrams can be viewed after the analysis is finished by clicking on the HISTOGRAMS
button in the Result Data area of the Measurement dialog box. When the HISTOGRAMS button has been
selected, the Histograms dialog box will open. Five different histograms are available: Aggregate Histogram, Cell
Diameter Histogram, Compactness Histogram, Object Diameter Histogram, and Measurement Statistics.
Click on the respective button to open the desired histogram.
All the results represented in the diagrams are based on valid images accepted for evaluation. This means that
individual images may be sorted out due to, for example, the presence of pollution. In the interest of an accurate
measurement result. This is done automatically by the analysis Software or manually by the user (see “Excluding
Images from the Evaluation Process/Including Excluded Images”).
7.1 Enlarging the Histograms
Certain areas of the histograms can be enlarged by following the instructions below:
1
Place the mouse pointer on the top left-hand corner of the area to be enlarged.
2
Hold the left mouse button pressed down and move it to the lower right-hand corner of the area to be
enlarged.
3
Release the mouse button and the selected area will fill the complete dialog box.
■
Return to the original size of the histogram by following the instructions below:
1
Place the mouse pointer anywhere on the diagram and right-click with the mouse.
2
A small dialog box will open with the options “Unzoom” or “Undo all Zoom/Pan”.
3
If the chart was enlarged more than once, selecting “Unzoom” will reduce the image to the point before the
last enlargement. Selecting “Undo all Zoom/Pan” will return the chart to its original size.
■
In addition, the diagrams can be moved around within the dialog box by placing the mouse pointer anywhere
in the diagram, holding down the middle mouse button and moving the mouse.
Graphical Display of the Analysis Results
Enlarging the Histograms