Cedex HiRes - Additional Applications: Growth Curve Analysis; Monitoring Cell Growth Over Time

27
Main Application: Counting Cells and Determining Viability
B
B
7.6 The Multi Run Result List
At the bottom of the Multi Run dialog box, the Analyzed Measurements field displays the list of results for
previous measurements. Measurements are listed in order of process time, from the newest measurements at
the top of the list to the oldest measurements at the bottom. All measurements performed via the Multi Run
dialog box are displayed in this field unless the CLEAR RESULT LIST button has been pressed. Pressing the
CLEAR RESULT LIST button clears all measurement results from the list.
The result list provides the following information:
c
User
c Workarea
c Reactor ID
c
Sample ID
c
Valid checkbox
c
Total cell concentration [× 10
5
cells/mL]
c Viable cell concentration [× 10
5
cells/mL]
c
Viability [%]
c
Sample Drawing (defined by user, if desired)
c Process Time (date and time sample was measured)
c
Comment (if added by the user)
Other results, such as Average Diameter, can be added for display in the result list via the User Preferences
(see Adjusting Result Display in the Measurement List and Multi Run Dialog Boxes in the Cedex HiRes Analyzer
Operator’s Guide).
In addition, measurements displayed in this field can be restricted to only the measurements carried out by
the user logged into the system (mine), measurements that have not yet been printed out (unprinted), and/or
measurements performed on that particular day (today).
Measurement results can be printed out via the PRINT REPORT button located just above the Analyzed
Measurements field (see Printing Reports in the Cedex HiRes Analyzer Operator’s Guide).
Setting up Multiple Measurements Using the Multi Run Dialog Box
The Multi Run Result List