7
Prologue
Conventions Used in this Guide
VI Conventions Used in this Guide
Text Conventions
To present information consistently and memorably, the following text conventions are used in this Training Guide:
Numbered list
Steps in a procedure that must be performed in the order listed.
Italic type
Used for operating instructions for the Cedex HiRes Software. In addition, important notes
and information notes are shown in italic type.
Blue italic type
Refers to a different section in this Training Guide or the Cedex HiRes Analyzer Operator’s
Guide, which should be consulted.
Symbols
In this Training Guide, the following symbols are used as visual signals:
Symbol Heading Description
WARNING This symbol is used to indicate that non-compliance with instructions or
procedures could lead to physical injury or even death or could cause
damage to the system.
IMPORTANT NOTE Information critical to the success of the procedure or use of the product.
INFORMATION NOTE Additional information about the current topic or procedure.
ccc
Procedure continued on next page.
n
End of procedure.
The following symbols appear on the analyzer:
Symbol Heading Description
CE MARK
The CE mark on the instrument type plate indicates conformity with
requirements of the directives relevant for this instrument.
cUL MARK On the instrument type plate.
CAUTION On the instrument type plate. Consult the accompanying documents for
important safety-related information such as warnings and precautions.
To Next Page
Loading...
Need help?
General