139
Appendix
F
F
F Appendix
1 System Options and User Preferences
The following list provides a description of all of the System Options that can be found in the Cedex HiRes
Software via the System Options dialog box found under the Setup menu of the Cedex Control Center.
If an adjustable option exists in both the System Options dialog box and the User Preferences dialog box, the
entries in the User Preferences dialog box take precedence over the entries found in the System Options. For
example, if the default Cell Type in the System Options dialog box is “CT1”, but user “Joe” selected Cell Type
“CT2” as the default in the User Preferences dialog box when he was logged in, the default Cell Type will be
“CT2” when the user “Joe” is logged in. The defaults set in the System Options dialog box will apply to new users
who have not set their own defaults in the User Preferences dialog box.
If the column SaveLastValue has been selected for a particular parameter (i.e., there is a cross in the column),
any new value entered in the corresponding location will be automatically saved in the System Options or the
User Preferences dialog boxes. For example, user “Joe” has set the default for the Cell Ty pe in the Measurement
section of his User Preferences dialog box to “CT1” and has activated the SaveLastValue option. If “Joe” changes
the Cell Type parameter to “CT2” when running a new measurement, “CT2” will be automatically saved as the
new default in his User Preferences dialog box and will be automatically recommended for the next measurement.
The SaveLastValue function can be activated for all options in the System Options dialog box and for all options
in the User Preferences dialog box for every individual user.
Measurements that have been migrated from older software database versions may have a different nomen-
clature with regard to certain information (e.g., Cell Type names or Precision names) than those described
in this manual. The settings described in this manual apply to measurements that have been performed with
Software version 2.4.
Rows that are shaded blue in the list below indicate options that exist in both the System Options dialog box
and the User Preferences dialog box.
System Options and User Preferences
To Next Page
Loading...