Cedex HiRes - Effective Data Sets

53
Software
C
C
6.2 Effective Data Sets
When measurements are reprocessed, it is possible to label one of the resultant data sets as Effective. The
Effective data set is the version of the measurement (original or reprocessed) that has the correct parameters.
Once a data set has been selected as Effective, it will be labeled as such in the Measurement List dialog box.
It is possible to later change which data set is labeled the Effective data set by doing the following:
1
Select the data set version of the measurement to be labeled Effective in the Measurement List dialog box.
2
Click on the REPROCESS button. A Measurement dialog box will open containing the results for that data
set.
3
Click on the box to the left of the word Effective in the Measurement dialog box. A check will appear in the
box.
4
Close the Measurement dialog box.
5
Click on FIND in the Measurement List dialog box to refresh the list; the newly selected data set will appear
as the Effective data set.
■
Editing Existing Analysis Results/Data Sets
Effective Data Sets