30
Cedex HiRes Analyzer Operator’s Guide
B
B
5.2
Access Control at the Cedex HiRes Software Level
To launch the Software:
1
Check that the Cedex Server Software has already been automatically started (it may appear as a minimized
dialog box in the task bar at the bottom of the computer screen). If it is not automatically started, start the
server by double-clicking on the Cedex Server icon on the desktop.
2
Start the Cedex HiRes Software by double-clicking the Cedex Client icon on the desk top (the Cedex
Server must be successfully launched before the Cedex Client can be started). The Log In dialog box of the
Cedex HiRes Software will open.
3
Enter the username and password in the respective fields. By default, the following users are available after
installation:
a. Superuser (password spass)
b. Administrator (password apass)
■
For the Cedex HiRes Software, there should generally be at least three levels of users. In addition to normal
Cedex HiRes Analyzer users, who will only use the Cedex HiRes Analyzer for carrying out measurements, both
a Cedex HiRes Analyzer Superuser and an Administrator should be appointed. The Cedex HiRes Analyzer
Superuser assumes the main responsibility of handling the Cedex HiRes Analyzer, whereas the Administrator
creates and administers user accounts.
For security reasons, both the Administrator and Superuser should protect their access to the Cedex HiRes
Software with new passwords after initial installation. Follow the instructions below to secure access and define
a new password:
1
Log in as Administrator or Superuser.
2
Click on the System menu in the Cedex Control Center.
3
Click on Change own password. The Change Password dialog box appears.
4
Enter the old password first. The new password needs to be entered twice.
5
Confirm by pressing OK.
■
After logging in, users can change their own passwords at any time by following the same procedure.
After installation, the user Administrator should set up user accounts and provide the necessary rights before
regular users run measurements (see “Administration of User Accounts”).
For security reasons, the Cedex HiRes Software Administrator is generally only given administrative rights
and cannot carry out, reprocess, or view measurements.
Access rights to routine operations for each user account vary depending on the configurations set by the
Administrator. See “Administration of User Accounts” for more information about access rights.
Accessing the Control Unit and Cedex HiRes Software
Access Control at the Cedex HiRes Software Level
To Next Page
Loading...