Cedex HiRes - Example of Cells Not Recognized by the Cell Type Std. Size

42
Cedex HiRes Analyzer Software Version 2.4 - Training Guide
C
C
2.2 Example of Cells Not Recognized by the Cell Type Std. Size
In the image from a measurement shown below, some live and dead cells were not identified using the standard
Cell Type Std. Size. This particular culture, therefore, requires a new Cell Type that includes changes to certain
parameters in the image analysis Software (Operator). The following chapters describe the steps to create a new
Cell Type, adjust the parameters for the Cell Type, and reanalyze the images using the new Cell Type:
c
Create a New Cell Type
c Modify the Parameters for the New Cell Type via the Live Operator dialog box
c
Reprocess the Measurement Using the New Cell Type as the Basis for the Image Analysis
Analyzing Unusual Cells
Example of Cells Not Recognized by the Cell Type Std. Size