97
Software
C
C
8
Click on to close the Archive dialog box.
9
Two files are generated for each archived measurement package and stored in the selected location:
c
.cx2 file
c .sig file
■
Figure 35
Both files are required for restoring the measurement package back into the Cedex HiRes Software DB.
Ensure that the two files are always stored in the same location to enable restoring of measurement packages
in the future.
A default entry for the path under which the archive file should be stored, can be entered in the System Options
function under the Setup menu. Choose Setup>System Options>Data Exchange tab>ArchivePath. In the
Value column, enter the desired default path (see list of User Preferences and System Options in the Appendix).
The following message may appear after selecting the measurements to be archived and clicking on the
ARCHIVE button:
If this message appears, click on YES to confirm the message and install the certificate. The archive will
continue after confirming the installation of the certificate.
Administrator Functions
Archiving Data
To Next Page
Loading...