18. Install the snap ring (1) using a screwdriver (2).
Fig. 337: Underdrive Clutch Assembly
Courtesy of CHRYSLER LLC
1 - OVERDRIVE/UNDERDRIVE CLUTCHES REACTION
PLATE TAPERED SNAP RING
2 - SCREWDRIVER (DO NOT SCRATCH REACTION
PLATE)
NOTE: Snap ring ends must be located within one finger of the input clutch hub.
Be sure that snap ring is fully seated, by pushing with screwdriver, into
snap ring groove all the way around.
NOTE: Do not reuse tapered snap ring.
1 - SNAP RING (TAPERED)
2 - OD/UD REACTION PLATE
3 - CLUTCH DISC
4 - SNAP RING (FLAT)
5 - CLUTCH PLATE
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:09 PM Page 196 © 2006 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
