Chrysler 62TE - Remote Pinion

Fig. 414: Remote Pinion
Courtesy of CHRYSLER LLC
The 23-tooth remote pinion is a helical gear driven by the output hub/carrier assembly. It is supported by a
bearing retainer and two tapered roller bearings, which centers the gear on its axis. The bearing preload is
adjusted with a selectable shim, located between the outer bearing race and the bearing retainer. The preload
measurement and ad
j
ustment must be made with the differential assembl
y
removed.
1 - REMOTE PINION GEAR 4 -
BEARING
RETAINER
2 - BEARING ROLLER (CONE) 5 -
BEARING
RACE
(CUP)
3 - SELECTABLE SHIM
-
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:10 PM Page 249 © 2006 Mitchell Repair Information Company, LLC.