EasyManua.ls Logo

Chrysler 62TE - Number 7 Bearing

Chrysler 62TE
387 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Courtes
y
of CHRYSLER LLC
31. Set up dial indicator (1) and measure 2/4 clutch clearance. Press down on clutch pack with finger and
zero dial indicator. 2/4 clutch pack clearance is 0.76-2.64 mm (0.030-0.104 in.). Set up indicator and
record measurement in four places. Take average of readings. If clearance is outside this range, the clutch
is assembled improperly. There is no adjustment for 2/4 clutch clearance.
Fig. 139: Number 7 Bearing
Courtesy of CHRYSLER LLC
1 - DIAL INDICATOR
2 - HOOK TOOL
3 - DIAL INDICATOR TIP 6268
1 - #7 NEEDLE BEARING
2 - REAR SUN GEAR
NOTE: The number seven needle (1) bearing has three anti-reversal tabs and is
common with the number five position. The orientation should allow the
bearing to seat flat against the rear sun gear. A small amount of
petrolatum can be used to hold the bearing to the rear sun gear (2).
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:08 PM Page 90 © 2006 Mitchell Repair Information Company, LLC.

Table of Contents

Related product manuals