Fig. 353: Press Down On Reverse Clutch & Zero Indicator
Courtesy of CHRYSLER LLC
41. Using moderate pressure, press down and hold (near indicator) reverse clutch disc (2) with screwdriver or
suitable tool and zero dial indicator (1). When releasing pressure, indicator should advance (0.005-0.010
in.) as clutch pack relaxes.
42. Apply 30 psi (206 kPa) air pressure to the reverse clutch hose on Input Clutch Pressure Fixture 8391.
Measure and record reverse clutch pack measurement in four places, 90° apart.
43. Take average of four measurements and compare with reverse clutch pack clearance specification. The
reverse clutch pack clearance is 0.76 - 1.245 mm (0.030 - 0.049 in.). Select the proper reverse clutch
snap ring to achieve specifications:
44. To complete the assembly, reverse clutch and overdrive clutch must be removed.
45. Install the number two needle bearin
(1).
1 - DIAL INDICATOR
2 - REVERSE CLUTCH
REVERSE CLUTCH SNAP RING THICKNESS
4377195 1.53-1.58 mm (0.060-0.062 in.)
4412871 1.77-1.83 mm (0.070-0.072 in.)
4412872 2.02-2.07 mm (0.080-0.082 in.)
4412873 2.27-2.32 mm (0.090-0.091 in.)
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:10 PM Page 208 © 2006 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
