REMOVAL
REMOVAL
1. Remove transmission and torque converter from vehicle. See Transmission and Transfer
Case/Automatic - 62TE - Removal.
2. Place a suitable drain pan under the converter housing end of the transmission.
3. Pull the torque converter forward until the center hub clears the oil pump seal.
4. Separate the torque converter from the transmission.
INSTALLATION
INSTALLATION
Fig. 579: Checking Torque Converter Seating
Courtesy of CHRYSLER LLC
CAUTION: Verify that transmission is secure on the lifting device or work
surface, the center of gravity of the transmission will shift when the
torque converter is removed creating an unstable condition.
The torque converter is a heavy unit. Use caution when separating
the torque converter from the transmission.
1 - SCALE
2 - STRAIGHTEDGE
2009 Chrysler Town & Country LX
2009 AUTOMATIC TRANSMISSION 62TE - Service Information - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:26:12 PM Page 359 © 2006 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
