Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

Programming Guide | VLT® AutomationDrive FC 360

Output value

Output

(Hz)

High output

value

P 5-60(term27)

P 5-63(term29)

High freq.

P 5-62(term27)

P 5-65(term29)

e30ba089.11

Figure 31: Configuration of Pulse Outputs

 NOTICE

These parameters cannot be adjusted while the motor is running.

5-60 Terminal 27 Pulse Output Variable

Default value: [0] No operation Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint8 Change during operation: True

Select the desired output on terminal 27.

Option Name

[0] No operation

[45] Bus ctrl.

[48] Bus ctrl., timeout

[100] Output frequency

[101] Reference

[102] Process Feedback

[103] Motor Current

[104] Torque rel to limit

[105] Torq relate to rated

[106] Power

[107] Speed

[109] Max Out Freq

[113] PID Clamped Output

[143] Ext. CL 1

Other manuals for Danfoss VLT AutomationDrive FC 360