Danfoss VLT AutomationDrive FC 360 Programming Guide

5-62 Pulse Output Max Freq 27
Default value: 5000 Hz Parameter type: Range (4–32000 Hz)
Setup: All setups Conversion index: 0
Data type: Uint32 Change during operation: True
Set the maximum frequency for terminal 27, corresponding to the output variable selected in parameter 5-60 Terminal 27 Pulse Output
Variable.
5-63 Terminal 29 Pulse Output Variable
Default value: [0] No operation Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the variable for viewing on the terminal 29 display.
Option Name
[0] No operation
[45] Bus ctrl.
[48] Bus ctrl., timeout
[100] Output frequency
[101] Reference
[102] Process Feedback
[103] Motor Current
[104] Torque rel to limit
[105] Torq relate to rated
[106] Power
[107] Speed
[109] Max Out Freq
[113] PID Clamped Output
[143] Ext. CL 1
5-65 Pulse Output Max Freq 29
Default value: 5000 Hz Parameter type: Range (4–32000 Hz)
Setup: All setups Conversion index: 0
Data type: Uint32 Change during operation: True
Set the maximum frequency for terminal 29 corresponding to the output variable set in parameter 5-63 Terminal 29 Pulse Output
Variable.
140 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English