Danfoss VLT AutomationDrive FC 360 Programming Guide

Option Name Description
[83] SL digital output D See parameter 13-52 SL Controller Action.
The output goes high whenever the Smart
Logic Action [41] Set dig. out. D high is
executed. The output goes low whenever
the Smart Logic Action [35] Set dig. out. D
low is executed.
[95] Power Loss Detection
[160] No alarm The output is high when no alarm is
present.
[161] Running reverse The output is high when the drive is
running counterclockwise (the logical
product of the status bits Running AND
Reverse).
[165] Local ref active
[166] Remote ref active
[167] Start command active The output is high when the drive is
running counterclockwise (the logical
product of the status bits Running AND
Reverse).
[168] Drive in hand mode The output is high when the drive is in
hand-on mode.
[169] Drive in auto mode The output is high when the drive is in
auto-on mode.
[170] Homing Completed The homing operation is completed. This
option is only effective when parameter
37-00 Application Mode is set to [2]
Position Control.
[171] Target Position Reached The target position is reached. This option
is only effective when parameter 37-00
Application Mode is set to [2] Position
Control.
[172] Position Control Fault A fault occurred in the positioning
process. Refer to parameter 37-18 Pos.
Ctrl Fault Reason for details about the
fault. This option is only effective when
parameter 37-00 Application Mode is set
to [2] Position Control.
[193] Sleep Mode The drive/system has entered sleep mode.
See parameter group 22-4* Sleep Mode.
[194] Broken Belt Function A broken belt condition has been
detected. See parameter group 22-4*
Sleep Mode.
[198] Drive Bypass
154 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English