Danfoss VLT AutomationDrive FC 360 Programming Guide

Programming Guide | VLT® AutomationDrive FC 360
Option Name Description
[14] Select preset ref 4 Select preset reference 4. If the active
preset reference is changed, it merges
with other preset reference commands
coming from either the digital inputs or
via a fieldbus.
[15] Select preset ref 5 Select preset reference 5. If the active
preset reference is changed, it merges
with other preset reference commands
coming from either the digital inputs or
via a fieldbus.
[16] Select preset ref 6 Select preset reference 6. If the active
preset reference is changed, it merges
with other preset reference commands
coming from either the digital inputs or
via a fieldbus.
[17] Select preset ref 7 Select preset reference 7. If the active
preset reference is changed, it merges
with other preset reference commands
coming from either the digital inputs or
via a fieldbus.
[18] Select ramp 1 Select ramp 1.
[19] Select ramp 2 Select ramp 2.
[22] Run Issue a start command to the drive.
[23] Run reverse Issue a start reverse command to the
drive.
[24] Stop Issue a stop command to the drive.
[25] Qstop Issue a quick stop command to the drive.
[26] DC Brake Issue a DC brake command to the drive.
[27] Coast The drive coasts immediately. All stop
commands including the coast command
stop the SLC.
[28] Freeze output Freeze the output of the drive.
[29] Start timer 0 See parameter 13-20 SL Controller Timer
for further description.
[30] Start timer 1 See parameter 13-20 SL Controller Timer
for further description.
[31] Start timer 2 See parameter 13-20 SL Controller Timer
for further description.
[32] Set digital out A low Any output with SL output A is low.
[33] Set digital out B low Any output with SL output B is low.
[34] Set digital out C low Any output with SL output C is low.
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 227

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English