Danfoss VLT AutomationDrive FC 360 Programming Guide

Table 21: Bits Definition (continued)
Bits Definition
Bit 5 Digital input terminal 18
Bit 10 Digital input terminal 31
16-61 Terminal 53 Setting
Default value: Size related Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
View the setting of input terminal 53.
Option Name
[0] Current mode
[1] Voltage mode
16-62 Analog input 53
Default value: 1.00 Parameter type: Range (0.00–20.00)
Setup: 1 setup Conversion index: -2
Data type: Uint16 Change during operation: True
View the actual value at input 53.
16-63 Terminal 54 Setting
Default value: Size related Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
View the setting of input terminal 54.
Option Name
[0] Current mode
[1] Voltage mode
16-64 Analog input 54
Default value: 1.00 Parameter type: Range (0.00–20.00)
Setup: 1 setup Conversion index: -2
Data type: Uint16 Change during operation: True
260 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English