Danfoss VLT AutomationDrive FC 360 Programming Guide

3.2.3 Automatic Motor Adaptation (AMA) 31
3.2.3.1 Overview 31
3.2.3.2 Running AMA Using the Numeric LCP 32
4 Parameter Descriptions
4.1 Parameter Group 0-** Operation/Display 33
4.1.1 Introduction 33
4.1.2 0-0* Basic Settings 33
4.1.3 0-1* Set-up Operations 35
4.1.4 0-2* LCP Display 38
4.1.5 0-3* LCP Custom Readout 42
4.1.6 0-4* LCP Keypad 46
4.1.7 0-5* Copy/Save 47
4.1.8 0-6* Password 48
4.2 Parameter Group 1-** Load and Motor 48
4.2.1 1-0* General Settings 48
4.2.2 1-1* Motor Selection 52
4.2.3 1-2* Motor Data 57
4.2.4 1-3* Adv. Motor Data I 61
4.2.5 1-4* Adv. Motor Data II 62
4.2.6 1-5* Load Indep. Setting 65
4.2.7 1-6* Load Depen. Setting 67
4.2.8 1-7* Start Adjustments 69
4.2.9 1-8* Stop Adjustments 73
4.2.10 1-9* Motor Temperature 75
4.3 Parameter Group 2-** Brakes 78
4.3.1 2-0* DC-Brake 78
4.3.2 2-1* Brake Energy Funct. 79
4.3.3 2-2* Mechanical Brake 82
4.3.4 2-3* Adv. Mech Brake 84
4.4 Parameter Group 3-** Reference/Ramps 85
4.4.1 3-0* Reference Limits 85
4.4.2 3-1* References 88
4.4.3 3-4* Ramp 1 92
4.4.4 3-5* Ramp 2 93
4.4.5 3-6* Ramp 3 94
ii | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English