C • Display Screens
Doc. 065051-03 1/08 233
Figure C-5. Detail Status Screen: Simultaneous Injection Mode
Figure C-6. Detail Status Screen: Concentrate Mode
Screen Field Description Values
TRAY
°C If the sample temperature control option is not
installed, “--” is displayed and the field is not
illuminated.
4 to 60 °C
(default=20)
If the sample temperature control option is
installed, this field allows you to select the tray
temperature set point in °C. The actual measured
temperature and a symbol indicating the
temperature status are displayed to the right of
this.
= The temperature is stabilized
↑ The temperature is increasing
↓ The temperature is decreasing
-- The temperature control option is off
Pressing Select Δ or Select ∇ turns the tray
temperature control on and off. The default is off.
When on, the default set point is 20 °C.
Help prompt
INJECTING
VIAL#:
TIME:
INJ#:
VOL:
METHOD:
TRAY:
TRAY:
LOOP:
0.0
25
25
100 / 25
1
1/3
01 P10 mL
uL
uL
min
TTL1
TTL2
RLY1
RLY2
INJ VLV 2
0
1
0
0
L
SIMULTANEOUS
SCH 1LOCAL
DETAIL
LINE 1
20 °C
INJ VLV 1
L
Help prompt
INJECTING
VIAL#:
TIME:
INJ#:
VOL:
METHOD:
TRAY:
TRAY:
CONCENTRATOR
0.0
25
25
1
1/3
01 P10 mL
uL
min
TTL1
TTL2
RLY1
RLY2
INJ VLV
0
1
0
0
L
SCH 1
LOCAL
DETAIL
LINE 1
20 °C
To Next Page
Loading...
