Model 1001 DFB Programming and operating manual
FICEP S.p.A. 79
Material not workable because of pincher dimensions (default 50 mm)
Minimum distance between two consecutive not parallel cuts (default 50 mm)
The same datum of field n. 06 in tool tables (normally used to differentiate tools with
same diameter but with some other different characteristic, for instance, the suppli-
er)
Checking this box the operator defines the priority of setup tables against tool tables.
Pressing this push-button a set of default data is activated
This push-button allows to modify values and options in the window. At the end of
operations the operator must press again F2 to confirm all modifications.
To Next Page
Loading...