CMS-D3 CENTRAL MANAGEMENT SOFTWARE
17
3. Alarm: Click to show the Alarm Panel. The Alarm Panel shows a list of system alarms
and events, such as motion detection events.
4. Clear Alarms : Click to clear all alarms from the list.
5. Mute Alarm Sound
: Click to mute/un-mute the audio alarms that are played
when events occur. To configure the alarm sounds that are played, see 17.12.3 Alarm
Sound, page 125.
6. Main View Toolbar:
• Full-Screen : Click to open the display grid in full-screen. Press ESC to exit
full-screen.
• Select Layout
: Click to select a display grid layout.
• Stop Live Display
: Click to stop camera streaming on all channels.
• Screenshot
: Click to save a screenshot of the currently selected channel.
• Manual Record
: Click to start/stop manually recording the currently selected
channel.
• Previous/Next
: Click to go to the previous or next camera or page.
• Sequence
: Click to configure Sequence mode.
• Volume
: Click to control volume.
7. Page
: When more cameras are opened than windows on the display grid,
they are organized into pages. The current page and total number of pages is shown
at the bottom of the Main View tab.
8. Alarm Panel Controls:
• Auto-hide: Click to enable/disable alarm panel auto-hide.
•
Maximize Alarm Panel: Click to open the Alarm Panel in its own tab.
•
Show/hide Alarm Panel
#LX400005; r. 1.0/13714/13883; en-US
107
To Next Page
Loading...
Need help?
General
