FLIR D3300 Series User Manual

Replacing the Hard Drive26
3. Next, install the hard drive:
• If installing a 3.5" hard drive: (1) Remove the 4 screws holding the hard drive brack-
et and remove the bracket from the DVR. (2) Place the hard drive in the bracket and
insert 4 screws to secure the hard drive to the bracket. (3) Place the hard drive and
bracket back in the DVR with the power and data connectors facing the middle and
replace the hard drive bracket screws.
1 2
3
• If installing a 2.5" hard drive: (1) Place the hard drive over one of the two sets of
screw holes with the power and data connectors facing the center of the DVR. Hold
the hard drive in place and carefully turn the DVR over. (2) Insert 4 hard drive
screws to secure the hard drive. Turn the DVR back over.
1
2
#LX400005; r. 1.0/13714/13883; en-US
175

FLIR D3300 Series Specifications

General

Brand	FLIR
Model	D3300 Series
Category	DVR
Language	English