GE MiCOM P747 Agile

1.1.7 Extract Settings From a Device 297
1.1.8 Extract a PSL File From a Device 297
1.1.9 Extract a DNP3 File From a Device 298
1.1.10 Extract an Events File From a Device 298
1.1.11 Extract a Disturbance Record From a Device 298
1.2 PSL Editor 298
1.3 IEC 61850 Configurator 298
1.4 DNP3 Configurator 298
1.5 Curve Tool 299
1.6 S&R Courier 299
1.7 AEDR2 299
1.8 WinAEDR2 299
1.9 Wavewin 299
1.10 Device (Menu) Text Editor 300
1.11 Event Viewer 300
1.12 GOOSE Editor 300
1.13 PRP Configurator 300
1.14 RSTP Configurator 300
1.15 Switch Manager 301
Chapter 11 Busbar Commissioning Tool 303
1 P747 Busbar Commissioning Tool (Remote HMI) 305
2 Scheme Editor 306
2.1 Connections 306
2.1.1 Manual Connections 306
2.1.2 Automatic Connections 306
2.1.3 Remove Connection 307
2.2 Scheme Elements 307
2.2.1 Add Elements to a Scheme 307
2.2.2 Remove an Element 307
2.2.3 Group Elements in a Scheme 307
2.2.4 Rotate Elements in a Group 307
2.3 Working with Text on the Scheme 307
2.3.1 Add a Label to an Element 308
2.3.2 Remove a Label From an Element 308
2.3.3 Change an Element's Label 308
2.3.4 Add or Remove Free Text 308
2.3.5 Validate a Scheme 308
3 Protection Data Monitor 309
3.1 Connect to the IED 309
3.1.1 Polling Timer 309
3.1.2 Read IED Data 309
3.1.3 Measurements Data 309
Chapter 12 Scheme Logic 311
1 Chapter Overview 313
2 Introduction to the Scheme Logic 314
3 Fixed Scheme Logic 316
3.1 Any Start Logic 317
3.2 VTS Acceleration Indication Logic 318
3.3 CB Fail SEF Protection Logic 318
3.4 CB Fail Non Current Protection Logic 319
3.5 Composite Earth Fault Start Logic 320
3.6 Any Trip Logic 320
3.7 SEF Any Start Logic 320
4 Programmable Scheme Logic 321
Contents MiCOM P747
viii P747-TM-EN-1
P747-TM-EN-1.1