D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
8-92 Section 8-5 - Electronic Cage Components - Replacement Procedures
PRELIMINARY
2) Working from the side of the cage, use a Phillips screwdriver to loosen the retaining screw on the
metal securing plate that holds the hard disk in position (as shown in Figure 8-115 below).
3) Grip the metal plate and slide it to the left to release the hard disk from the Back End assembly
- see Figure 8-116 below.
Figure 8-115 Loosening the Screw on the Metal Securing Plate
Figure 8-116 Removing the Hard Disk
To Next Page
Loading...
