Hioki 3166 - Page 215

193
────────────────────────────────────────────────────
11.4 Command Reference
────────────────────────────────────────────────────
■ Initial screen display
Synta
x
DISPlay:INItial
dat
a
No present
Functio
n
Displays the initial screen.
Not
e
If an attempt is made to execute this command while waiting for or
executing integrated measurement and demand measurement, a device-
dependent error results. Use the STOP command to release the power
meter from the integrating state before executing this command.
Erro
r
In the following circumstances, a device dependent error is generated:
If an attempt was made to execute this command while waiting for or
executing integrated measurement and demand measurement.
In the event of a system error.
Exampl
e
Transmission
":DISP:INI"
Displays the initial screen.
■ Data reset execution
Synta
x
DRESet
dat
a
No present
Functio
n
Executes a data reset, clearing the minimum/maximum value data,
integrated data, and demand data.
Erro
r
In the following circumstances, a device dependent error is generated:
If an attempt was made to execute this command while waiting for or
executing integrated measurement and demand measurement.
) In the event of a system error.
Exampl
e
Transmission
":DRES"
Executes a data reset.
D
ISPlay:INItial
D
RESet