299
────────────────────────────────────────────────────
18.1 Product Specifications
────────────────────────────────────────────────────
Contents of related settings
Contents of setting mode, etc.
Integration start method
Time specification/manual
* Format for time specification: YY.MM.DD, HH.MM (24-hour
system)
Integration stop method
Time specification/timer/manual
* Timer specification: 10 seconds to 1000 hours (in 10-second
steps)
* Format for time specification: YY.MM.DD, HH.MM (24-hour
system)
Output interval time
2 minutes to 1000 hours (one-minute intervals)
Print/save items
Same items as in Normal Measurement mode, plus integrated
values and average values within a time period.
FD auto output
On/off
File names
Up to eight alphanumeric characters (normal width) or four
kanji (double width)
RS-232C auto output
On/off
D/A output items
Same items as in Normal Measurement mode, and active power
integration (consumption, regeneration, addition)
Integrated output rates
5 V/5 kWh,5 V/10 kWh,5 V/50 kWh,5 V/100 kWh,5 V/500k Wh,
and 5 V/1 MWh
■ Demand Measurement mode
Instantaneous value display
Same as instantaneous value display contents for Normal
Measurement mode.
Integrated displays 1 and 2
Same as integrated displays 1 and 2 for integrated
measurement, and also average values within a time period.
Minimum/maximum value
display
Same as minimum/maximum display contents for Normal
Measurement mode (during integration time).
Demand display
Displays results from the previous (most recent) demand
measurement period (power integration during the demand
period, average values within a time period, and maximum
demand value).
Maximum demand value generation time: Generation time of
the maximum demand value, up to the previous demand period
Minimum/maximum value
display
Same as minimum/maximum display contents for Normal
Measurement mode (during demand time).
Daily report display
Demand measurement results for a one-day period (24 hours)
following the demand measurement starting date and time
Maximum demand value generation time: Generation time of
the maximum demand value a one-day period (24 hours)
following the demand measurement starting date and time
Minimum/maximum value display
Same as minimum/maximum display contents for Normal
Measurement mode (during daily report period).
To Next Page
