4.3 Setting DC Resistance Measurement
94
When the judgment synchronization setting is enabled and you want to set the optimal range relative to the
comparator or BIN measurement judgment standards, it is necessary to re-set the range with .
Judgment synchronization setting
• This setting is only available when the judgment standards have been set for comparator
and BIN measurement.
• When judgment standards have been set for comparator and BIN measurement with this
setting on, the range will be automatically switched to the optimal range. However, AUTO
range operation will be used when no judgment standards have been set.
LCR Measurement Screen
Procedure
1
LCR Basic Settings
Press .
2
LCR Basic Settings
To Next Page
Loading...
