4.3 Setting DC Resistance Measurement
97
4
Chapter 4 LCR Function
• Low Z high accuracy mode is only available for the 100 m and 1 ranges.
Refer to the table below.
• Changing the low Z high accuracy mode setting while open compensation, short com-
pensation, or load compensation is enabled causes the compensation values to be dis-
abled.
No. Measurement range
1 100 M
2 10 M
3 1 M
4 100 k
5 10 k
6 1 k
7 100
8 10
9 1
10 100 m
Normal mode only
(setting not possible for low Z high accuracy mode).
Low Z high accuracy mode/ normal mode
To Next Page
Loading...
