Hioki IM3533 - Page 139

4.5 Setting Application Settings
131
4
Chapter 4 LCR Function
3
HIGH-Z Setting
Select ON/OFF for the HIGH-Z reject function.
Disables the HIGH-Z reject function.
Enables the HIGH-Z reject function.
Use or to set the judgment reference
value.
4
Settable range: 0% to 30000%
HIGH-Z Setting
• A ratio is set using the range name as the refer-
ence value.
Example: When the 1 k
 range is used:
A ratio to the value of 1 k is set.
• If you make a mistake during input:
press to cancel the input and start again.
5
Press to close the setting screen.