Beep sound setting (p. 185)
Key-lock setting (p. 186)
Backlight setting (p. 184)
Panel loading and saving (p. 251)
System reset (p. 191)
Application settings
Contact check function setting (p. 177)
IO trigger setting (p. 189)
Waveform averaging function setting
(p. 173)
AUTO range limit function (p. 180)
EOM output method setting (p. 190)
Trigger synchronous output function
(p. 171)
HIGH-Z reject function setting (p. 175)
Save settings of measurement results
(p. 177)
ANALYZER mode measurement screen is displayed.
To Next Page
Loading...
