11.4 Saving Measurement Data
278
Procedure
2
LCR Measurement Screen File Save Setting Screen
Insert the USB flash drive into the USB port (front panel).
1
Press .
3
File Save Setting Screen
Disables the text file type.
Saves measurement values as text data.
4
File Type Setting
Press .
Enable the text file type.
5
Turns the save date and time ON/OFF.
Turns the measurement condition ON/OFF.
Turns the measurement parameter ON/OFF.
Sets the delimiter type.
Sets the quotation mark type.
Select the header setting.
File Save Setting Screen
Set the header of the text file.
To Next Page
Loading...
