Hioki IM3533 - Page 288

11.4 Saving Measurement Data
280
Measurement Condition Setting
Measurement Condition Setting
1. Select ON/OFF for the measurement condition setting.
Does not record the measurement condition.
Records the measurement condition.
2. Press to close the setting screen.
"HIOKI E.E. CORPORATION","IM3533","Ver. 1.00",
"Serial No. 123456789"
"DATE","11-11-30"
"TIME","10:10:06"
"FREQ","1.0000E+03","Hz"
"V","1.000","V"
"LIMIT","OFF"
"RANGE","AUTO","10k","ohm"
"LOW Z","OFF"
"JUDGE SYNC","OFF"
"JUDGE","OFF"
"SPEED","MED"
"TRIG","INT"
"AVG","OFF"
"DELAY","0.0000","s"
"TRIG SYNC","OFF"
"DCBIAS","OFF"
"OPEN","OFF"
"SHORT","OFF"
"LOAD","OFF"
"CABLE","0","m"
"SCALE","OFF"
"Z[ohm]","OFF","PHASE[deg]","OFF"
"4.987600E+03","","0.074",""
"HIOKI E.E. CORPORATION","IM3533","Ver. 1.00",
"Serial No. 123456789"
"DATE","11-11-30"
"TIME","10:10:37"
"Z[ohm]","OFF","PHASE[deg]","OFF"
"4.987600E+03","","0.074",""
When ON When OFF