Hioki IM3533 - Page 395

Appendix
Appendix 13 Device Compliance Statement
A25
Item Description
17. Capacity of the user data storage area reserved
for when the "
PUD" command and the
"
PUD?" query are being executed
The "PUD" command and the "PUD?" query are not used.
Further, there is no user data storage area.
18. Resources when the "RDT" command and the
"*RDT?" query are being used
The "RDT" command and the "RDT?" query are not used.
Further, there is no user data storage area.
19. Conditions which are influenced when "RST",
"
LRN?", "RCL?", and "SAV" are used
"LRN?", "RCL?", and "SAV" are not used. The"RST"
command returns the instrument to its initial state.
See Description of communications commands on the included
LCR Application Disk.-”
RST”
20. Scope of the self-testing executed as a result of
the "
TST?" query
See Description of communications commands on the included
LCR Application Disk.- "TST"
21. Additional organization of the status data used
in a device status report
See The included LCR Application Disk.
22. Whether commands are overlap or sequential
type
All commands except :MEASure?, :MEMory?,
:CORRection:OPEN, :CORRection:SHORt, and
:CORRection:LOAD are sequence commands.
23. Criterion relating to the functions required at the
instant that the termination message is pro-
duced, as a response to each command
Termination occurs when the command has been parsed.