2.7 Turning the Power On and Off
36
Be on standby
ON the main power in the state, hold down the front Standby Key 2 seconds approximately.
Lights red
What is the standby state?
The instrument is in the standby state when measurement has been stopped and the instrument is waiting
for STANDBY key input to be detected. To allow STANDBY key input to be detected, some internal cir-
cuitry is operating with power consumption of approximately 4 W.
To cancel the standby
The instrument is in standby state, press the Standby Key on the front.
To ensure that measurements fulfill the degree of accuracy described in the specifications, allow the
instrument to warm up for at least 60 minutes after standby state operation is canceled.
Lights green
To Next Page
Loading...
