Hioki IM3533 - Page 90

4.3 Setting DC Resistance Measurement
82
Turn the temperature correction function on or
off.
Disables the temperature correction func-
tion.
Enables the temperature correction func-
tion.
3
Temperature Correction Function Setting
4
Reference Temperature Setting
Press and use the numeric keypad to
set the reference temperature.
Settable range: -10C to 99.9C
Press key to confirm the setting.
5
Temperature Coefficient Setting
Press and use the numeric keypad to
set the temperature coefficient.
Settable range: -99999ppm to 99999ppm
Press key to confirm the setting.
6
Press to close the setting screen.