Restore
Upload the configuration file to be used at
the next startup from the host of the current
user to the device.
Management
Save
Save the current configuration to the
configuration file to be used at the next
startup.
Configure
Initialize Restore the factory default settings. Configure
File
Manage
File Manage
Manage files on the device, such as
displaying the file list, downloading a file,
uploading a file, removing a file, and
setting the main boot file.
Management
Port
Manage
ment
Summary Display port information by features. Monitor
Detail Display feature information by ports. Monitor
Setup
Create, modify, delete, or enable/disable
a port, and clear port statistics.
Configure
Port
Mirroring
Summary
Display the configuration information of a
port mirroring group.
Monitor
Create Create a port mirroring group. Configure
Remove Remove a port mirroring group. Configure
Modify Port Configure ports for a mirroring group. Configure
Users
Summary
Display the brief information about FTP and
Telnet users.
Monitor
Super Password
Configure a password for a lower-level
user to switch from the current access level
to the management level.
Management
Create Create an FTP or Telnet user. Management
Modify Modify FTP or Telnet user information. Management
Remove Remove an FTP or a Telnet user. Management
Switch To
Management
Switch the current user level to the
management level.
Visitor
Loopback Loopback
Perform loopback tests on Ethernet
interfaces.
Configure
VCT VCT
Check the status of the cables connected to
Ethernet ports.
Configure
Flow
Interval
Port Traffic
Statistics
Display the number of packets and bytes
received and sent by the interface, and the
bandwidth usage within a specified time
interval.
Monitor
Interval
Configuration
Set an interval for collecting traffic statistics
on interfaces.
Configure
To Next Page
Loading...
Need help?
General