282
a. Select Network > DHCP from the navigation tree to enter the default DHCP Relay page.
b. Select Enable for DHCP Service, as shown in Figure 268.
c. Cli
ck Apply.
Figure 268 Enabling DHCP
2. Configure a DHCP server group:
a. In the Server Group field, click Add.
b. Enter 1 for Server Group ID, and enter 10.1.1.1 for IP Address, as shown in Figure 269.
c. Cli
ck Apply.
Figure 269 Adding a DHCP server group
To Next Page
Loading...
