284
Configuring Switch B
1. Enable DHCP snooping:
a. Select Network > DHCP from the navigation tree.
b. Click the DHCP Snooping tab.
c. Select the Enable option next to DHCP Snooping to enable DHCP snooping.
Figure 272 Enabling DHCP snooping
2. Configure DHCP snooping functions on GigabitEthernet 1/0/1:
a. Click the icon of GigabitEthernet 1/0/1 on the interface list.
b. Select the Trust option next to Interface State as shown in Figure 273.
c. Cli
ck Apply.
To Next Page
Loading...
Need help?
General