tion
Authentication
Domain
Specify an authentication domain for Layer 3 portal users.
After you specify an authentication domain on a Layer 3 interface, the device uses the
authentication domain for authentication, authorization, and accounting (AAA) of the
portal users on the interface, ignoring the domain names carried in the usernames. You
can specify different authentication domains for different interfaces as needed.
The available authentication domains are those specified on the page you enter by
selecting Authentication > AAA from the navigation tree. For more information, see
"Configuring AAA."
Figure 367 Adding a portal server
Table 110 Configuration items
Item Descri
tion
Server Name
Type a name for the remote portal server.
IP
Type the IP address of the remote portal server.
Key
Type the shared key to be used for communication between the device and the remote
portal server.
Port
Type the port number of the remote portal server.
URL
Specify the URL for HTTP packets redirection.
IMPORTANT:
Redirection URL supports domain name resolution, however, you need to configure a
portal-free rule and add the DNS server address into the portal-free address range.
Figure 368 Configuring the local portal server
To Next Page
Loading...
Need help?
General