HP 830 Series User Manual

373
Figure 380 Enabling the DHCP service
e. In the Server Group area, click Add.
f. On the page that appears, enter the server group ID 1 and the IP address 1.1.1.3, and click
Apply.
Figure 381 Configuring a DHCP server group
g. In the Interface Config area, click the icon of interface VLAN-interface 8.
h. On the page that appears, select Enable for DHCP Relay, select 1 for Server Group ID, and
click Apply.

HP 830 Series Specifications

General

Brand	HP
Model	830 Series
Category	Switch
Language	English