383
Figure 396 Configuring a RADIUS accounting server
3. Configure RADIUS scheme system for exchanges between the device and the RADIUS servers:
a. Click the RADIUS Setup tab.
b. Select extended as the server type.
c. Select the Authentication Server Shared Key box, enter the key expert, and then enter the key
again in the Confirm Authentication Shared Key field.
d. Select the Accounting Server Shared Key box, enter the key expert, and then enter the key
again in the Confirm Accounting Shared Key field.
e. Select without-domain as the username format.
f. Click Apply.
To Next Page
Loading...
